Arnês Kitesurf Manera EXO 2.0

 340.00 IVA incluído

Thanks to a stiffer center area, the EXO 2.0 perfectly supports the back. However, it allows greater freedom of movement thanks to its different levels of rigidity, especially its flexible outline.

The soft part of the EXO 2.0 is built in one “Single foam”. The single foam doesn’t absorb any water, so the harness stays light and comfy once in use.

STIFFNESS – 80%
LIGHTNESS – 95%
DURABILITY – 90%

Test your size in https://fitting-manera.com/en/

REF: Arnes Exo2 Categorias: , ,

Video

Arnês Kitesurf Manera EXO 2.0

It is difficult to improve a harness like the EXO, but the development of the ECLIPSE has taught us a lot and we have used this experience to redesign our star harness. We applied Adaptive Shell Technology to the EXO model to provide better support, reduced weight and increased durability.

Thanks to a stiffer center area, the Manera EXO 2.0 perfectly supports the back.

However, it allows greater freedom of movement thanks to its different levels of rigidity, especially its flexible outline.

The soft part of the EXO 2.0 is built in one “Single foam”. The single foam doesn’t absorb any water, so the harness stays light and comfy once in use.

STIFFNESS – 80%
LIGHTNESS – 95%
DURABILITY – 90%

Thanks to a stiffer center area, the EXO 2.0 perfectly supports the back.

The Adaptive Shell

stiffness shades from hard in the center area to softer on the edges. The stiff center-belt prevents the harness from folding and compressing your body while preserving a good lumbar support.

Single foam

The EXO 2.0 uses a single thermoform mould to make a one-piece foam backing. It absorbs far less water and is much lighter than the multiple foam layups used in some harnesses.

Down hold system

Because there’s nothing worse than a harness that rides up during your sessions, we developed the DOWN
HOLD SYSTEM, an asymmetrical attachment that distributes the forces downward. Secured in its original position, the hook does not ride back up.

Tuck flap
The TUCK FLAPS further assist the DOWN HOLD SYSTEM using the flaps positioned on the ends of the spreader bar and inserted into the harness. Once the straps are tightened, they are compressed and locked.

By stiffening the connection between the harness and the buckle, they prevent it from riding up.

Spreader bar system
We wanted to avoid unpleasant lateral contraction of the harness on the chest, which is why we adapt our spreader bar to harness sizes.

A well suited spreader bar will pull along both sides of the harness, while a spreader bar that is too small will pull with an acute angle, putting pressure on the rider and causing troublesome pain.

Arnês KITESURF Manera EXO 2.0

Também pode gostar…

  • On Sale!Kite F-One Bandit XV

    KITE F-ONE BANDIT XV

     1,160.00 1,408.00 IVA incluído
    De 2022-01-01 até 2022-12-31 ou até acabar stock
    Ver opções
  • Arnês Kitesurf Manera ECLIPSE
  • On Sale!Prancha F-One Twintip TRAX HRD Lite Tech

    Prancha F-One Twintip TRAX HRD Lite Tech

     488.00 647.00 IVA incluído
    De 2022-01-01 até 2022-12-31 ou até acabar stock
    Ver opções
Shopping Cart
Scroll to Top