F-One Foils Monobloc Tails
€ 340.00 IVA incluído
The new F-One foils monobloc tails are a premium connection that will make any foil more playful, more stable, and faster.
F-One Foils Monobloc Tails
The new F-One foils monobloc tails are a premium connection that will make any foil more playful, more stable, and faster.
Choosing the right Monobloc Tail is the second step in choosing your best Plane set up.
The tail influences the behavior of the entire plane and will impact your ride.
Simply changing your tail can make your foil setup behave completely differently, and will bring you new sensations and performances.
You can check the chart below to help you choose your F-ONE Monobloc Tail.

Just like when it comes to choosing your front wing, your decision should vary depending on your skill level, your weight, the conditions, and your chosen program.
F-One Monobloc Tails
F-One Monobloc Tails combine the stabilizer and the rear part of the fuselage.
This Monobloc construction improves stiffness and flow efficiency by eliminating connections and providing a more streamlined design.
This premium connection will make your foil more reactive, more stable, and faster.
It also removes two screws, so you can be on the water quicker.
There are a few basic principles to our Monobloc Tails.
Overall, the tails with the bigger surfaces offer more stability, accessibility and are easier to ride, but have added drag.
The smaller tails are faster and more maneuverable, but a bit less stable.
For the same stab surface, a shorter fuselage will bring tighter turns.
However in terms of maneuverability and efficiency, it is more beneficial to choose a smaller stab.
In turn, we have adapted the fuselage length for you so the plane isn’t twitchy, i.e. pitch-sensitive.
Aiming for maximum efficiency, our latest Monobloc Tails hence feature, in general, smaller wings and longer fuselages for a more uniform balance, less drag, and enhanced pitch stability.
All in all, when choosing your Monobloc Tail, keep in mind that the smaller tails will perform better at higher speeds, while the larger ones prove more effective at lower speeds.
In the end, it all depends on what you are doing, and it could also be worth trying different ones for yourself to see how big of an impact a tail makes on your front wing.
Our Monobloc Tails Range is split into four different models: Carving, Carving W, Downwind (DW) and Pumping.
These come in a variety of sizes, and different Aspect Ratios.

You can pair these tails with your Front Wing, depending on with your body type, your chosen discipline, or how much stability you’re looking for.
Monobloc Tail Carving
ASPECT RATIO 8.0
Six sizes: XS 140cm², XS 160cm², XXXS 160cm², XXXS 180cm², XXS 180 cm² and XXS 200cm²
Designed for experienced surf foilers and wing foilers.
Smaller surface area = more speed / Longer fuselage = greater stability
New profile for balanced front/rear leg support

With a thin profile and higher aspect ratio, the Carving range is the way to go if you need speed and maneuverability.
These Monobloc Tails will provide a looser, more snappy feeling, as well as a faster pumping pace.
All sizes are equipped with fences on the wingtips to reduce the induced drag and to improve the overall performances and maneuverability.
The Carving profile is quite powerful and provides a great pumping and low end.
This is the weapon of choice for surf foilers who need to pump back to the peak, or for wing foilers who want a comfortable low end.
The smaller sizes benefit from a new profile, leading to a stance slightly more towards the rear.
In turn, these will help you get as close as possible to the feeling of pure surf with greater speed and better control of the foil in the pocket.
The longer fuselage brings stability and enables you to push hard into your turns.
Monobloc Tail Carving W
ASPECT RATIO 8.0
Two sizes: XS 141cm², XS 161cm²
Designed for medium to experienced wing foilers.
Smaller surface area = more speed / Longer fuselage = greater stability.
New profile for balanced front/rear leg support allowing comfort at greater speed and power during carves.

The Carving W profile was built to provide the best possible pitch stability and steady lift.
No matter the speed, no matter how much you push in the carves, the Carving W tails will hold and stay stable.
These tails are a bit more difficult to pump and hence are more directed toward winging and tow-in.
These tails are made for wing foilers who are looking for higher speeds and more powerful carves.
Thanks to their new profile, reduced surface area and longer fuselage, they provide the best possible balance between front and back foot, with a steady lift at all times.
Monobloc Tail DW
ASPECT RATIO 8.8
Four sizes: XS 145cm², XXS 170cm², XXXS 190cm² and XXS 210cm²
Designed for experienced downwind riders
Smaller surface area = greater speed / longer fuselage = greater stability
Maximum forward projection

The Monobloc Tails DW provide improved speed as well as greater stability and forward projection so you can perform better with less fatigue.
They are perfect to link waves, and greatly enhance the efficiency and fun of your downwinds.
The smaller sizes benefit from a longer fuselage to provide pitch stability and better forward projection, which is a great advantage in strong wind conditions where the foil will cross bumps without jolting or over-power.
With their thin and optimized designs for minimal drag, these Monobloc Tails make the foil more playful, allowing you to better connect bumps and have more fun carving.
Monobloc Tail Pumping
ASPECT RATIO 7.6
Made for dockstarts and endless pumping sessions
Monobloc construction for better stiffness and reduced turbulence

As its name indicates, this Monobloc Tail is specific to pump foil and dockstart sessions.
It pairs up perfectly with our JAM foil.
With an aspect ratio of 7.6 and large surface area, this tail offers exceptional pumping abilities and a fantastic glide.
The angle of the stab has been specially designed to optimize weight distribution evenly over the front and back legs, reducing fatigue and boosting endurance when pumping.
All in all, our Monobloc Tail range was built with “plug and play” in mind so that each front wing and tail have a balanced behavior when correctly paired together.
Each of our front wing has at least one tail recommended as a first choice, and we have also added secondary suggestions that are relevant depending on the rider’s level and the chosen discipline.

Here are some of the benefits of the new F-One foils monobloc tails:
Increased stiffness: The monobloc construction makes the foil stiffer, which will improve its performance and make it easier to control.
Reduced turbulence: The monobloc design also reduces turbulence, which will make the foil smoother and more stable.
Streamlined design: The monobloc design is more streamlined than the old design, which will improve its performance and make it faster.
Easier assembly and disassembly: The monobloc design removes two screws, which will make it easier to assemble and disassemble the foil.
Overall, the new F-One foils monobloc tails are a significant improvement over the old design. They are stiffer, more stable, and faster, and they are also easier to use. If you are looking for a premium connection that will make your foil perform better, then the F-One foils monobloc tails are the perfect choice.
Brand
F-One
A TripleOne é o Distribuidor exclusivo para Portugal das Marcas F-One e Manera.
F One equipamento completo para Kitesurf, Foil e Wing Foil F One Kitesurf - Kites, barras, pranchas twin tip, pranchas surf. Acessórios Manera - Arneses, coletes de impacto, capas para pranchas e sacos de viagem, travelbags. F One Foil - Surf foil - Foils e pranchas. - Sup Foil - Foils, pranchas e remos, pagaias. - Kite Foil - Foils kite, pranchas Acessórios Manera - Arneses, coletes de impacto, capas para pranchas e sacos de viagem, travelbags. F-One Wingfoil - Foils, pranchas e asas wings. Acessórios Manera - Arneses, coletes de impacto, capas para pranchas e sacos de viagem, travelbags. Consulta todo o material que temos disponivel na nossa loja online, ou visita o showroom em Lisboa, através de marcação, por mensagem ou telefone.F-One
F One is a French kitesurfing brand founded in 1994 by Raphael Salles. Salles was a pioneer in the sport of kitesurfing, and he was one of the first people to develop and market kitesurfing equipment.F-One quickly became one of the leading kitesurfing brands in the world, and its products are used by some of the best kitesurfers in the world.
F-One is known for its innovative designs and high-quality products. The company has been at the forefront of kitesurfing technology, and it has developed many of the features that are now standard on kitesurfing equipment. For example, F-One was the first company to develop a delta-shaped kite, which is now the most common type of kitesurfing kite. In addition to its kites, F-One also produces a wide range of other kitesurfing equipment, including boards, bars, and harnesses. The company also offers a variety of accessories, such as wetsuits and fins. F One is a truly global brand, with distributors in over 50 countries. The company is committed to supporting the kitesurfing community, and it sponsors a number of professional kitesurfers and events. F-One is a leading force in the kitesurfing industry, and it continues to innovate and push the boundaries of the sport. The company is committed to providing its customers with the best possible products and services, and it is dedicated to supporting the kitesurfing community.
You may also like…
-
F-One Foil Stabilizers
€ 36.00 – € 235.00 IVA incluído Select options This product has multiple variants. The options may be chosen on the product page -
Foil Phantom-S Carbon
€ 779.00 – € 1,139.00 IVA incluído Select options This product has multiple variants. The options may be chosen on the product page